大家都知道不管我們?nèi)ツ睦镔I(mǎi)衣服都要找到我們適合相對應的碼數，這樣才可以穿的舒服，我們的工作的時候穿的衣服也是這樣的，每個人必須根據自己合適的碼數去選擇，這樣我們工作的時候才會提率，那么我們工衣定做需要哪些尺寸？

　　Everyone knows that no matter where we go to buy clothes, we need to find the corresponding size that suits us, so that we can wear them comfortably. The clothes we wear when we work are also the same. Everyone must choose according to their own suitable size, so that we can improve efficiency when we work. So, what sizes do we need for custom-made workwear?

　　衣長：由前身左側脖根處，通過胸部點，量對需長度，一般量手的虎口。

　　Clothing length: Measure the required length from the left neck root of the predecessor, passing through the highest point of the chest, usually up to the tiger's mouth on the hand.

　　袖長：由左肩骨外端頂點量手的虎口，按需要增減長度。

　　Sleeve length: Measure from the outer vertex of the left shoulder bone to the tiger's mouth of the hand, and adjust the length as needed.

　　袖口：圍量手腕一周，再按需要加放尺寸還可根據款式的不同用胸圍比例法計算。

　　Cuff: Measure the circumference around the wrist, and add size as needed. You can also use the chest circumference ratio method to calculate according to different styles.

　　領大：沿喉骨下圍量一周，按需要加放尺寸。

　　Collar size: Measure the circumference along the lower part of the larynx for one week and add dimensions as needed.

　　胸圍：代表上衣類服裝“型”，在襯衫外，沿腋下，通過胸部豐滿處，平衡圍量一周，按需要加放尺寸；肩寬：由后背左肩骨外端頂點量右肩骨外端頂點軟尺在后背貼緊后脖根略成弧形，肩可適當放，燈籠袖款可適當改窄；腰節：一般體型可按總體高算出，遇到特殊體型時就需要量取前后的腰節尺寸（在腰部細處，圍一條皮尺成水平），分別量取前后腰節的尺寸；褲長：由腰部左側胯骨上端，向上4厘米往下量腳跟減3厘米；腰圍：代表褲子類服裝“型”。在單褲外沿腰間細處圍量一周，按需要加放尺寸；臀圍：沿臀部豐滿處平衡圍量一周，按需要加放松度；上襠：由腰部右側胯骨上端，向上4厘米量。

　　Chest circumference: represents the "shape" of top clothing. It is measured around the shirt, along the armpits, and through the fullest part of the chest, with a balanced circumference of one week, and additional sizes added as needed; Shoulder width: Measure from the outer vertex of the left shoulder bone on the back to the outer vertex of the right shoulder bone. Use a soft ruler to stick tightly to the center of the back and slightly curve the neck. The shoulder can be placed appropriately, and the lantern sleeve style can be narrowed appropriately; Waist joint: For general body types, it can be calculated based on overall height. When encountering special body types, it is necessary to measure the size of the front and rear waist joints (at the thinnest part of the waist, wrap a tape measure horizontally), and measure the size of the front and rear waist joints separately; Pant length: From the upper end of the left hip bone at the waist, measure upwards by 4 centimeters and downwards by 3 centimeters from the heel; Waist circumference: represents the "shape" of pants clothing. Measure around the thinnest part of the waist at the outer edge of the underwear and add size as needed; Hip circumference: Balance the circumference around the fullest point of the buttocks and add relaxation as needed; Upper crotch: Measure 4 centimeters upwards from the upper end of the right hip bone at the waist.

　　我們濟南工裝定做的時候老板要統計好每個人的衣服尺寸，然后定做合適員工穿的服裝，工衣定做需要哪些尺寸今天我們就分享到這里，我們?cè)诮o員工測量時穿緊身內衣，測量時保持自然放松，端正的姿態，測量"圍度"時保持皮尺水平,松緊適當，不易過松,也不易過緊；如自己無法測量準確，可下載以上需測量的部位，去裁縫店請裁縫幫忙測量。

　　When we customize workwear in Jinan, the boss needs to calculate the size of each person's clothes and then customize suitable clothing for employees. Today, we will share with you the sizes required for workwear customization. When measuring employees, it is best to wear tight underwear, maintain a natural and loose posture, and keep the tape level when measuring the "circumference". The elasticity should be appropriate, not too loose or too tight; If you are unable to measure accurately yourself, you can download the parts that need to be measured above and go to a tailor's shop to ask a professional tailor to help measure them.

　　本文由  濟南工裝定做  友情奉獻.更多有關的知識請點擊  http://www.ynwkxny.cn/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Tooling Customization For more related knowledge, please click http://www.ynwkxny.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned